Date: 30 October 2014
Subject: Maintenance Pack 2 for NX 9.0.3
To: All users of NX 9.0.3
From: The Siemens PLM NX Team
——————————————————————————–
We are pleased to inform you that fixes are available for the problems listed below. A maintenance pack (MP2), built for installation on top of Windows64 and Linux64 images of NX 9.0.3, can now be downloaded from the Siemens PLM Download Server.
This release provides:
Important PR fixes.
New Manufacturing functionality.
Note: Some of the new NX CAM features are available only upon request through the CAM Early Adopter Program. In order to learn more about these pre-release features and how you can access them, please contact your local Siemens PLM GTAC support group.
New CMM Inspection functionality.
After installing this MP, please read the “What’s New in NX 9.0.3 MP2” section of the NX 9 Help documentation.
This maintenance pack addresses the issues associated with the PR numbers and short descriptions listed in the table below.
Release
PR Number
Problem Description
MP1
1884853
Feature recognition fails for specific part
MP1
1900620
Retract Move damaged the Workpiece but NX does not realize this
MP1
1906637
CUTCOM/OFF is missing when working with retract type point
MP1
1920336
planar milling, smoothing – giving duplicate points in output
MP1
1922003
IPW Collision happened when additional Finish Pass is set in Cavity Mill
MP1
1924333
In Cavity Milling the Tool Gouge the Part
MP1
1943631
Cavity Mill error message: Put to Grid Attempted on out of range coordinate
MP1
1943641
Contour violation with transfer move in a Z-Level-operation
MP1
1944066
CAM Tool path regression on certain rough groove part
MP1
1945482
User Defined Mill Tool gives illegal instruction with 21 or more sections w/ TCM
MP1
1947747
Put to Grid Attempted… Error generating cavity mill operation
MP1
1948175
wrong value for area by using Area using Curves Analysis method
MP1
1949961
Tool gouges part during engage movement
MP1
1950109
No gouged motions found, but it exist
MP1
1950253
Put To Grid Error on ZLevel Profile
MP1
1951032
Selection filter is lost
MP1
1951641
Milling IPW Transfer not out of date
MP1
1952111
Tool with ICO+Item but without PRT File comes up with the select Template Part
MP1
1953212
Generic motion feed rate problem
MP1
1955487
Wrong calculation of milling paths using Zlevel profile
MP1
1956872
Creating Non-Orthogonal and Left Hand Coordinate Systems should not be Possible
MP1
1963841
In a Thread-Op.the Start- and End-Point of the Crest-Line missed
MP1
1964013
TDM tool search starts each time when running the FBM Create feature process
MP1
1964593
Java API accepts Datum letters not valid for DMIS in dialogs
MP1
1964854
Tool Start Position not equal when changing Cut Pattern to ZIG or ZIGZAG
MP1
1966486
mom_motion_type in WEDM-Post changed between NX7.5 and NX8.5 from Retract-Point
MP1
1969677
4-Ax WEDM Geometry and Lead In Point is wrong after update to NX8.5.3.3
MP1
1969852
BOM-View does not show any used Tool on a Sub-Carrier and Sub-Pocket (Device)
MP1
1971484
CSE turning tool simulation fails for B-head turning tool path
MP1
1975875
NX9 subtracts works different than NX6 subtracts. Problems in CAD and CAM TURNING
MP1
1976299
Error 3295016 (Error while creating spun outline) inside Simulation with RMU
MP1
1978545
NX CAM turning testcut retract position
MP1
1978569
Turning test cut mom_turn_test_cut_measuring_position
MP1
1979574
UF_CAMGEOM_append_items doesnt run with NX 8.5.3 MP3
MP1
1979671
Unable to open a NX Cam Part
MP1
1981569
GEOG – UF_CAMGEOM_append_items doesn’t run with NX 8.5.3 MP3
MP1
1981698
Turning & simulation with cutcom contact/Tracking Data is not correct
MP1
1981846
Gouge Issue in Z-LEVEL 5 Axis when Tool Offset Insertion is Defined in Holder
MP1
1982582
Holemaking – Wrong order of operations
MP1
1983487
custom attributes in tooldata for export tools disturbs NX Tool Creation
MP1
1986220
Creating Operation within a Hole Making group operations needs to be generated
MP1
1986319
CAM: Machining Feature Navigator do not show the correct Operation Status
MP1
1986575
CAM: Cannot post process after delete setup
MP1
1987520
Edit Work Section is grayed out by verifying a complete Program-Group
MP1
1987558
Attempt to save bad pointer, save aborted after replacing a subcomponent.
MP1
1988141
Internal error for Z-Level Operation
MP1
1989196
Deselect Boundary Entities
MP1
1989404
Don’t change value when I choose Inherited from Local in Part Side Stock.
MP1
1989496
Wire EDM 4-axis doesn’t follow the upper profile correct.
MP1
1989750
Update display issues when electing boundaries
MP1
1990345
Rough Offset generates a bad result with offset value over 80mm
MP1
1991847
Linked Part Module cannot be updated
MP1
1991940
Failed to open NX8.5 file in NX9.0.2
MP1
1992030
Opening CAM Template parts in NX9.0.2 fails with internal error
MP1
1992703
CAM Verify_3D-Dynamic_with 3D-Tool_assembly and Circle_Motion
MP1
1992860
Sequence shows a wrong movement
MP1
1993072
KF Adopted Composite Curve remains out-of-date when changing input curve
MP1
1993262
Bug in post builder 9.0.2
MP1
1993352
NX Partfile does not open
MP1
2183907
FASC; Radial drive method; negative stepover value locks NX and O/S
MP1
2215793
Error Put to Grid Attempted on out of range coordinate when generate toolpath
MP1
2222131
Wavy NC path generated in Cavity Mill and Zlevel in NX8.5
MP1
2226317
Wavy NC path generated in Zlevel in NX8.5
MP1
2226899
wrong result from trimming tool path
MP1
2231584
Unable to update toolpath after modify threaded hole
MP1
2231996
Engage motion does not pass along the Start/Drill Point specified.
MP1
2233755
Error difference occurs with incremental output in NX8.5
MP1
2233842
Error Put to Grid Attempted on out of range coordinate when generate toolpath
MP1
2234131
WEDM Tool path collision occurs with Roll Around.
MP1
2234145
WEDM : Tool path cannot be generated with Wire Tool.
MP1
2235224
Specifying a Lead in Point raises Encountered unexpected NULL pointer error.
MP1
2235667
Display Option Tool fails to run Verify with an error.
MP1
2236039
URG Error difference occurs with incremental output in NX8.5
MP1
2236229
Unable to open part with Internal Error: Memory access violation error message
MP1
2237863
WEDM Open Profile returns a Null Tag Error after Geometry modification.
MP1
2239010
EWCS is gone when open the file in NX8.5
MP1
2239910
Unable to open a part with error An invalid tag was passed to the tag module
MP1
2241684
Arc engage changed for Zlevel TP on cylinder from 853.3
MP1
2242048
NX report shortest tool show Unknown error when we select the check geometry
MP1
2242501
Reload List from Parent does not work.
MP1
2242506
Copy Display is grayed out when Verify is run from MB3-Tool Path.
MP1
2242967
Tool path is not generated with warning message when Lead in Distance is set 0.
MP1
2243334
Only Cut Along Wall and Floor does not work correctly.
MP1
2243523
Maximum Distance of stepover is not updated from Set Machining Data.
MP1
2244378
NX9.0.2 crashing after saving NX data which was previously created in NX7.5
MP1
6413560
Gouge Check fails to report tool gouge during rapid move
MP1
6449862
Cavity Mill operation plunges into the part during a region transfer
MP1
6563069
engage move created with add finish passes collides with the IPW
MP1
6623101
NCM Transfer using Lowest Safe Z is gouging part
MP1
6764311
gouge on lead in pass
MP1
6767720
Getting Rough cut generation failed when trying to reverse path.
Product:Siemens.NX.v9.0.3.MP02.Update.OnlY
Lanaguage:Multi Language
Platform:Win/Linux
Size:2DVD