Tekla Structures 2017 SP2
Release Notes – Fixes in Tekla Structures 2017 SP2
Show Filters
Defect number Development area Description
Defect number Development area Description
131037 Concrete components
In Concrete beam-beam (112), non-concrete parts can be now removed from the assembly.
131036 Concrete components
In Concrete console (110), the neoprene is now created in the correct position when the console is not created.
130524 Concrete components
Previously, anti-skid profiles created in Concrete stairs (65) were not included in IFC
export. This has now been fixed.
130419 Concrete components
In Rectangular column reinforcement (83), the intermediate links are now created correctly.
126938 Concrete components
In Embedded anchors (8), the default grade of reinforcing bars is now set to Undefined.
131120 Steel components
In Multiple stiffeners (1064), weld preparation
cuts are now correctly created when the XS_AISC_WELD_MARK advanced option is set to TRUE.
131087 Steel components
In Cast-in plate
(1069), aligning the bolts with the beam instead of the clip angle
no longer deletes the clip angle.
131086 Steel components
In Cast-in plate
(1069), aligning the bolts with the beam instead of the clip angle
no longer affects boltand clip angle positioning.
130702 Steel components
In Base plate
(1004), the horizontal slots in shim
plates are now correctly created.
130521 Steel components
In Bolted gusset
(11), the gusset offset from bracing is now correctly applied.
130175 Steel components
In Full depth S (185) and JP Full depth special (185), the assembly prefix and start number
for the tab plate
are now correctly set to the default values when left empty in component dialog box.
129708 Steel components
In Bolted gusset
(11), the rectangular gusset plate
no longer gets a new ID after you click Modify.
125698 Steel components
In Stub connection
(119), the middle plates and bolts are now created correctly when the secondary part
is skewed.
125253 Steel components
In Simple clip angle
(31) and Two side clip angle (33), it is now possible to define the Finish property for all parts on the Parts tab.
125200 Steel components
In Column site weld splice (137), welds 3 and 4 are now created with the correct settings as defined in the component weld dialog box.
122599 Steel components
In Tube gusset
(20), the stiffeners are now created inclined to the gusset side angles, and it is possible to fit them to the main part
118520 Steel components
In Beam prep (183), the welds on the upper and lower flange of the secondary part
are now correctly created when connecting to the column web.
113645 Steel components
In Tube gusset
(20), the end plate
is now correctly welded to the connection
plates when the connection plates are not inside the bracing.
103709 Steel components
In Stanchion side profile (86), it is now possible to set the top edge distance of bolts on the Sbolts tab.
98573 Steel components
In Stub (133), the stub upper and lower flange chamfers were sometimes missing. This has now been fixed.
92440 Steel components
In Round joining plates (124), it is now possible to create a circle hole
in the base plate
when the base plate
is created as a contour plate
.
89938 Steel components
In Stiffened shear plate
(17), the stiffener
is now correctly created when you define its setback
.
88193 Steel components
In Splice connection
(77), deck support plates are now always created at the top flange when the main and secondary parts are sloped.
85772 Steel components
In Stub (28), it is now possible to define top and bottom offsets for all stiffeners.
85709 Steel components
In Multiple stiffeners (1064), the stiffeners are now created with the correct length also when created not perpendicular to the main part
.
84567 Steel components
In Diagonal splice (53), the vertical offset of bolts is now correctly applied on all bolts.
83644 Steel components
In Full depth S (185), the haunch
plate
is now correctly positioned when the secondary part
is sloped.
83642 Steel components
In U.S. Base plate
(1047), increasing the bolt
pattern size (spacing) now automatically increases the plate
size.
83167 Steel components
In End plate
(144), the top and bottom notch chamfer
cuts are now created with the correct dimensions.
82566 Steel components
In Partial stiff end plate
(65), it is now possible to define bolt
rotation on the Bolts tab.
80705 Steel components
In Bracing cross (19), slotted holes for bolts are now correctly applied.
54515 Steel components
In Clip angle
(141), a manual notch in the bottom flange no longer causes a cut in the top flange.
130959 Task Manager
In Task manager
, creating a dependency
in the Gantt chart
could cause all the tasks to disappear and Task manager to stop working. This has now been fixed.
130934 Task Manager
In Task manager
, you can now again create subtasks for collapsed tasks.
130549 Task Manager
In Task manager
, the activity code is now correctly copied when you create a copy of a task
.
TTSD-4217, 130513 Import, export, interoperability
Spaces in IFC
property set file names did not work. This has now been fixed.
TTSD-4939 Import, export, interoperability
In IFC
object conversion, conversion as extrusion now works again. Previously, extrusion profile mapping did not work, or in some cases, the conversion as extrusion did not work at all.
TTSD-4638 Import, export, interoperability
Save as did not handle plan databases correctly. This has now been fixed.
Product:Tekla Structures 2017 SP2
Lanaguage:english
Platform:Win7/WIN8
Size:1DVD