Gibbscam.2016.11.3.18.0.Win64
Version 11.3.18.0 Update List, November 18, 2016
The following is a collection of improvements and fixes to the latest release of GibbsCAM software dating back to GibbsCAM v11.2.0.0
This list is sortable, clicking on a header will sort the contents by that category.
Bug# Support # Version Item Description
44805 5605-10154519 11.3.18.0 Post: Resolved an issue preventing the ability to alternate tool holder selection with the scroll bar within Lathe tool dialogs.
44535 11.3.17.0 Post: Resolved an issue that prevented R Level funtion from using extended origin options.
44649 SYB-44687-891 11.3.17.0 Fix: Resolved an issue that resulted in the Wall Cleanup parameter within VoluMill to generate unexpected toolpath.
44662 11.3.17.0 Post: Updated Post Engine to generate an error instead of crashing when a post asks for an axis that doesn\’t exist.
44680 5605-10148706 11.3.17.0 Fix: Resolved an issue causing multiple options within the Materials dialog inside a Thread Process to become disabled.
44684 5605-10148427 11.3.17.0 Post: Resolved an issue with SolidSurfacer that produced a zigzag toolpath when Gouge Protect was enabled.
44694 5605-10145621 11.3.17.0 Fix: Resolved an issue preventing files from opening after opening CAD type files from DCD.
44397 5605-10143284 11.3.17.0 Fix: Resolved an issue within Simulation where changing the speed of rendering would cause differing amounts of material to be removed.
44692 5605-10145978 11.3.17.0 Fix: Resolved an issue causing \”Stop Before Every Tool\” option to become inoperable.
44685 5605-10145686 11.3.17.0 Update: Added the ability to apply negative values to the start and end extensions.
44698 5605-10145143 11.3.17.0 Fix: Resolved an issue that upon redoing all operations an error \”Tool too big\” would be incorrectly presented.
44716 11.3.17.0 Update: SolidWorks Add-In now loads in SolidWorks 2017.
44719 ZLY-33682-379 11.3.17.0 Fix: Resolved an issue that could cause inaccurate rotary solutions to be computed when Work Areas are used.
44725 5605-10151408 11.3.17.0 Fix: Resolved an issue preventing GibbsCAM from properly reading Catia V5 files.
44740 5605-10150729 11.3.17.0 Fix: Resolved an issue that caused a crash when switching Turning tool type after changing Diameter Relief.
44522 11.3.16.0 Fix: Resolved an issue in which posting an older 10.7 part file would incorrectly output Y and Z values scaled from the axis.
44526 5605-10146812 11.3.16.0 Fix: Resolved an issue causing part station list to not be populated within thread milling processes.
44527 5605-10147379 11.3.16.0 Fix: Resolved an issue that caused Gibbs to crash when deleting a tool assigned to an open lathe process dialog.
44491 5605-10146998 11.3.15.0 Fix: Resolved an issue causing a crash when segmenting a spline.
44453 11.3.15.0 Fix: Resolved an issue causing balloons within the macros dialog to contain invalid characters.
43970 KQE-16818-196 11.3.15.0 Fix: Resolved an issue preventing macros from correctly selecting the \’Front Face\’ lathe contour option.
43302 11.3.14.0 Fix: Resolved an issue in which cut off operations would reset the sub spindle C-Angle to 0 degrees.
43980 11.3.14.0 Post: Resolved issues within the SetAxisOffset command within posting that caused GibbsCAM to crash when posting.
33127 NRX-96141-682 11.3.14.0 Fix: Resolved issues with Unwrap Geometry not functioning correctly when using 2.5 axis machining.
43908 11.3.14.0 Post: Resolved an issue where posting would use the wrong work-plane as the depth axis.
44401 5605-10143039 11.3.13.0 Fix: Resolved an issue in which redoing an OP and selecting a different CS would produce overcuts in toolpath.
44022 11.3.13.0 Update: Added a command to get the \”Alternate Present Point\” for lathe tools.
44389 5605-10143032 11.3.11.0 Fix: Resolved an issue causing a countour process to produce bad output when only selecting points and using \”Automatic\” for surface/ feature depth.
44360 LFI-13557-116 11.3.11.0 Fix: Resvolved an issue causing the Printed Shorcuts from Help > Shorcuts to have a gray box covering the text.
44336 SZS-45291-996 11.3.11.0 Update: Allow adaptive column dimensioning of user attribute manager color popup.
44334 11.3.11.0 Update: Added SET_TOOL_DATA parameter to be utilized by macros for loading Mill Tool types.
44328 KNP-94133-992 11.3.11.0 Fix: Resolved an issue preventing a macro from setting tip angle for a Single-point mill tool.
44323 BMW-62387-111 11.3.11.0 Fix: Resolved an issue causing tool comments to be populated based off previous tools when using AutoWiz and HoleWiz.
44302 5605-10140360 11.3.11.0 Fix: Resolved an issue preventing Slice Silhouette from properly slicing all sections of a solid.
44298 5605-10140880 11.3.11.0 Fix: Resolved an issue that caused Peck Full Out option to be ignored when redoing a Plunge Rough operation.
44273 XZQ-37443-318 11.3.11.0 Fix: Resolved an issue causing field focus to shift when backspacing to edit tools in the Adv3D.
44215 11.3.11.0 Fix: Resolved an issue within Classroom edition that caused browsing for a post file to trigger an unhandled exception.
Product:Gibbscam.2016.11.3.18.0.Win64
Lanaguage:Multi Language
Platform:Win7/WIN8
Size:15 GB